Fevicol Multi Purpose Spray Adhesive – Ezee Spray
Fevicol Ezee Spray – Technical Data Sheet
| Property | Value |
|---|---|
| Product Description | Fevicol Ezee Spray is a high temperature resistant sprayable contact adhesive designed for permanent bonding of materials where immediate bond strength and high heat resistance are required. |
| Application Area | Ideal for bonding HPL and fabrics to MDF, chipboard, plywood, veneer, and other timber materials. Suitable for vertical, ceiling, and edge banding applications. |
| Viscosity | 350 cps at 25°C (sp#2, 30 r.p.m.) |
| Total Solids | 28%-30% |
| Colour | Clear or Green System |
| Flammability | Non-flammable adhesive in flammable propellant |
| Heat Resistance | 115°C (25mm/100g) |
| Dry Time | 1-2 minutes (depending on temperature and humidity) |
| Open Time | 30 minutes |
| Application Method | Spray adhesive on the surface, maintain 100-250mm distance from surface, allow adhesive to dry, press substrates together with adequate pressure (35 psi minimum) using a nip roller or hand J-roller. |
| Substrate Compatibility | Recommended for MDF, chipboard, plywood, veneer. Not suitable for plasticized vinyl, flexible plastics, expanded/extruded polystyrene, PE, or PP. |
| Product Benefits | Fast drying, good heat resistance, high solids, portable system, easy application control, Class 1 fire rating. |
| Special Precautions | Store canister above 18°C during use, but must always be above 10°C. Use only in well-ventilated areas, keep away from sources of ignition, do not expose to extreme heat over 50°C. |
| Shelf Life | 18 months from the date of manufacture |
| Pack Size | 500 ml Aerosol Can |
| Manufacturer | Pidilite Industries Limited |
| Marketing Division | P.B. No. 17411, Andheri (East), Mumbai 400 059, India |
Note: It is recommended to test the product for suitability under your operating conditions before use. We cannot assume responsibility for misuse or mishandling.
Exclusive Offers: Use Codes for Discounts!
5% off on Alex WPC products.
Free Delivery + 8% off on orders above INR 8 lacs.
5% Discount on Orders Above INR 5 Lacs.
Rs. 500 off for new customers.
Product Description
Fevicol Ezee Spray is a high-temperature-resistant sprayable contact adhesive designed for permanent bonding of materials. This industrial-grade adhesive is perfect for applications where immediate bond strength and heat resistance are required. It is ideal for bonding HPL, fabrics, MDF, chipboard, plywood, and veneer.
Benefits
- Fast drying
- Good heat resistance
- High solids content
- Portable system
- Easy application control
- Class 1 fire rating
Typical Properties
| Property | Details |
|---|---|
| Viscosity | 350 cps (25°C sp#2, 30 r.p.m.) |
| Total Solids | 28%-30% |
| Colour | Clear or Green System |
| Flammability | Non-flammable adhesive in flammable propellant |
| Heat Resistance | 115°C (25mm/100gram) |
| Dry Time | 1-2 min, depending on temperature and humidity |
Application Method
Before use, always test Fevicol Ezee Spray for suitability for your specific application. Follow these steps for optimal results:
- Prepare the surface to be bonded, ensuring it is clean and free of dust, dirt, and grease.
- Hold the spray gun at a distance of 100-250mm (4-10”) from the surface. For thick laminates, allow adhesive to cobweb; for thin laminates, use a 50-70% overlap on successive passes.
- Maintain a constant speed during spraying and avoid over-wetting the surface.
- For maximum bond strength, spray both mating faces at 90° to each other. A double coating around the edges is recommended for better coverage.
- Allow the adhesive to dry until it feels tacky but does not transfer to the skin. Press substrates together, working from the center outwards, applying pressure using a nip roller or J-roller.
- Repositioning is not possible after contact. Final strength is achieved after 24-48 hours, depending on temperature and humidity.
Special Precautions
- Not recommended for use with plasticized vinyl, flexible plastics, expanded/extruded polystyrene, PE, or PP.
- Store canister between 18°C and 50°C during use. Avoid exposure to extreme heat.
- Use in well-ventilated areas. Keep away from ignition sources.
- Always test for suitability before use. Review MSDS and Technical Data Sheets before application.
Shelf Life & Packaging
- Shelf life: 18 months from the date of manufacturing.
- Pack size: 500 ml aerosol can.
- Open time: 30 minutes.
Note
We recommend testing the product before use to ensure it is suitable for your specific requirements. Pidilite Industries Limited cannot assume responsibility for the use of the product under customer-specific conditions.
Reviews
There are no reviews yet.